Emmaline Hardware

These Magnetic Edge Clasps sit on the edge of a bag flap or strap closure. Perfect for gorgeous clutches, handbags, and evening bags. They are very easy to install, and look stunning! Measurements: Width 1 5/8" (40mm) x Height 7/8" (22 mm) To install: Simply attach the magnetic...

These nice thick metal end caps will finish off your 3/4" wide (18 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the 2 include screws to secure. Mini screw driver required & glue highly recommended....

Inside measurements: 25 mm (1") x 3.5 mm in thickness These medium weight alloy O-rings come in your choice of 5 finishes. Use these gorgeous rings on any handbag or purse for a beautiful professional looking finish. Available in packs of 4. Prices may vary depending on the finish. The copper finish...

Sold in a 4 Pack - These SCREW together grommets come with front and back pieces that screw together with 2 screws that are provided. Recommended for use with leather, vinyl, cork, and heavy woven fabrics. Use Fray Check on fabric edges that fray, use glue for metal & fabric, or rubber cement/contact...

These rectangular rings are great to attach your handles and straps to your totes, and purses. Available in different sizes and finishes. Not all sizes are available in all finishes. Pair up with our flat strap sliders to make adjustable straps! Inside Measurements: 1" (25 mm) x 1/2" (12 mm) x 3 mm Available...

Sold in a 4 Pack - These grommets come with front and back pieces and go together very easily with two prongs to fold over the back piece. These are fantastic grommets for purse or tote bag straps or a decorative belt detail. Suitable for thicknesses that compress to 1/8" (3mm) or less. Inside Measurements:...

Small turn locks for your purses and wallets. Perfect for the The Necessary Clutch Wallet pattern from Emmaline bags. Easy to install. Available in the following finishes: - antique brass - copper - gold - gunmetal - iridescent - silver Sold in packs of 1. Prices may vary depending on the finish. How...

These heavy, high quality turn locks are of superb quality and will make a statement on any of your handmade bags and purses. Easy to install with included screws. 1- 7 /8" ( 47 mm) wide 3/4" (18 mm) high Important!! These are suitable for bag flaps and closures, but not necessarily for wallets. The...

Turn lock styled in a gorgeous heart shape. These are very pretty and of superb quality and would look fantastic on any wallet, clutch or purse. Easy to install with included screws. Sold in packs of 1. Prices may vary depending on the finish. Measurements: 30mm (1 3/16") x 28mm (1 1/8")

These nice thick metal end caps will finish off your 1" wide (25 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the two included screws to secure. Mini screw driver required & glue highly recommended....

Inside measurements: 38 mm (1-1/2") x 4 mm in thickness These medium weight alloy O-rings come in your choice of 5 finishes. Use these gorgeous rings on any handbag or purse for a beautiful professional looking finish. Available in packs of 4. Prices may vary depending on the finish....

Finish up your bag straps or add decorative details with these Double-Cap Rivets (both the front and back look like a smooth round cap). Go HERE for an awesome tutorial to teach you about choosing the right size, installing, and which tools you may need. Measurements: Medium: 3/8" Caps x 5/16" Post (9mm...

Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security! Place the backing plate prongs (the catch part) through your fabric and secure over a washer. Add a layer of stabilizer in between for strength. Easy!...

Sold in packages with TWO pairs of frames, so you can make two bags! Approximate Length (6" X 2 1/4") These wire frames are specially designed for the Small sizes of the Trifecta Zip Bags , pattern by Emmaline Bags. 2 Wire frames (1 pair) are required for each of the 3 sizes of the Small Set.

These heavy, high quality turn locks are of superb quality and will make a statement on any of your handmade bags and purses. Easy to install with included screws to attach the front and back plates together onto the front flap, and a metal washer to connect turning (twist) part onto the bag/wallet body....

These rectangular rings are great to attach your handles and straps to your totes, and purses. Available in different sizes and finishes. Not all sizes are available in all finishes. Pair up with our flat strap sliders to make adjustable straps! Inside Measurements: 1.5" (38 mm) x 1/2" (12 mm) x 3 mm...

A very sturdy, high quality press lock. No key required, this is a non-locking press lock/thumb catch/tongue lock! Go HERE for the installation tutorial. OR Install this little lock by sliding the press part onto a finished bag or wallet flap and screwing through the back to secure - USE GLUE for security!...

Finish up your bag straps or add decorative details with these Double-Cap Rivets (both the front and back look like a smooth round cap). Go HERE for an awesome tutorial to teach you about choosing the right size, installing, and which tools you may need. Measurements: Large: 3/8" Caps x 7/16" Post (9...

A shiny single link chain will swing from your arm beautifully and bling up any handmade bag! Comes with large hooks on each end, big enough to clip onto a 1/2" D-ring 44" Long (112 cm) x 1/4" (6 mm) wide (46 1/2" total length including hooks)

These heavy, high quality, super shiny flip locks are perfect for your purse, satchel, or clutch. They would suit well on a flap or wide strip over your bag opening, giving it a super professional look. The Quarter Note Clutch from Emmaline Bags was specifically designed for this lock. Available in silver...

These nice thick metal end caps will finish off your 1 1/2" wide (38 mm) bag straps beautifully. They are high quality with a professional textured finish on the back side. Just slide these onto the end of your strap and use the 2 include screws to secure. Mini screw driver required & glue highly recommended....

These Wallet Closures are the bars that sit on the top edges of wallets & purses. You put the back on one side and the front (with hole) on the other and pull them together to close your wallet up tight. The flip part clicks in place nicely for security. They are prepackaged and come with 10 screws (8...

These attach with a very professional looking back plate with screws that lock into threads on the front plate. Very reliable and easy to attach. These are very high quality and won't disappoint. Please note that the name of these has changed from "Edgwena" to "Edge Connectors" to differentiate the old...

These strap anchors make bag straps easy! Go for a classy & professional look, or a more casual bag - either will work with these strap anchors. Make a beautiful new handbag in fabric, vinyl, leather, canvas, or cork like the one I made in the photos. The strap ring inside measurement...

These strap anchors are sleek and stylish! Make a trendy new tote in fabric, vinyl, leather or cork, and use these lovelies to attach your bag straps. You can have them positioned so that the strap ring is above the edge of the bag opening, or below, you choose! They are so easy to attach....

Note: The HINGE on the tube frame HAS CHANGED. These internal frames are just the thing for carpet bags and doctor's bags. They have quality, barrel type hinges and are used in The Companion Carpet Bag by Sewing Patterns by Mrs. H. Large size (12") Installation: Remove pins, insert frame into frame casing...