£0.00
Metal Edge Trim: Style A - Large Pointed
£3.50 inc. tax

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight.  They also have screw holes in the back to secure them on tightly.

Can be used with Janelle's Mix & Match Clutch Bag Class on Craftsy.

 Available in packs of 1.  Prices may vary depending on the finish.

* The copper finish is more of a pink/copper than an orange/copper depending on the lighting. It looks a lot like "rose gold", but without it containing actual gold. 

Instructions:

  • Simply trace the metal trim onto your paper pattern piece first, and then ADD your seam allowance on second by measuring with a ruler. This way, you will have the perfect shape and a nice fit. 
  • Interfacing and stabilizer is recommended in your front flap piece.
  • After your front flap is complete and turned right side out, check your trim piece for fit, adjust if necessary, and topstitch if desired.
  • Slide the metal bar on again and screw in place - do not pre-cut holes for screws, but put them right through the fabric. 
  • You may want to use clear, fast-grab glue in the channel to secure. You may need a small flat screw driver to press fabric into the channel if it's tight.

Measurements:

  • Overall Width:7 3/8" (19 cm)x Depth at Center:2 1/2" (63 mm)
  • Channel: 1/8" (3 mm)

Product Code:bh_trim_a
Brand:Emmaline Hardware
Product Condition:New
weight:11g
17 Units in Stock
Customer Reviews
No Reviews Posted Yet - be the first!
write review
Product Added to your Cart
x

-------- OR --------