Metal Edge Trim: Style A - Large Pointed

Metal Edge Trim: Style A - Large Pointed

£3.75 inc. tax

These front flap trim pieces have been designed to be used specifically with thinner materials and quilting cottons. They can still be used with leather, vinyl and cork, not a worry - but they only have a 1/8" (3 mm) channel so your fabric will fit in nice and tight. They also have screw holes in the back to secure them on tightly.

Can be used with Janelle's Mix & Match Clutch Bag Class on Craftsy.

Available in packs of 1. Prices may vary depending on the finish.

* The copper finish is more of a pink/copper than an orange/copper depending on the lighting. It looks a lot like "rose gold", but without it containing actual gold.

Instructions:

Simply trace the metal trim onto your paper pattern piece first, and then ADD your seam allowance on second by measuring with a ruler. This way, you will have the perfect shape and a nice fit.
Interfacing and stabilizer is recommended in your front flap piece.
After your front flap is complete and turned right side out, check your trim piece for fit, adjust if necessary, and topstitch if desired.
Slide the metal bar on again and screw in place - do not pre-cut holes for screws, but put them right through the fabric.
You may want to use clear, fast-grab glue in the channel to secure. You may need a small flat screw driver to press fabric into the channel if it's tight.

Measurements:

Overall Width:7 3/8" (19 cm)x Depth at Center:2 1/2" (63 mm)